Accepted papers
Šárka Nenadálová, Lukáš Balík, Jiří Kolísko:
PROPERTIES OF HISTORIC FULL BURNT BRICK AND THEIR FINISHING
Tarak Assaleh, A.G. Gibson, M.S. Abdul Majid:
QUALIFICATION AND LIFETIME MODELLING OF FIBERGLASS PIPE
Marek Vronka, Miroslav Karlík:
MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Al-Mn SHEETS WITH Zr ADDITION
Ondřej Kovářík, Petr Haušild, Zdenek Pala, Pavel Sachr, Vadim Davydov:
EFFECT OF GRIT-BLASTING ON RESIDUAL STRESS FIELD
Jaroslav Menčík:
ENERGY ASPECTS OF CONCENTRATED CONTACT AND INSTRUMENTED INDENTATION
J. Tracz, G. Tomkowicz, G. Moskal, B. Witala, M. Mikuskiewicz:
CHARACTERIZATION OF PHENOMENA BETWEEN CMAS AND SAMARIUMZIRCONATE DURING HIGH TEMPERATURE HEATING
G. Tomkowicz, J. Tracz, M. Mikuskiewicz, G.Moskal, B. Witala:
CHARACTERIZATION OF VOLCANIC ASH MORPHOLOGY AND ITS REACTIONS WITH Sm2Zr2O7 DURING HIGH TEMPERATURE HEATING
G. Tomkowicz, J. Tracz, G. Moskal, M. Mikuśkiewicz, B. Witala:
MICROSTRUCTURE AND THERMAL PROPERTIES OF DOUBLE CERAMIC LAYER THERMAL BARRIER COATINGS
A. Grabowski, A. Jasik, G. Moskal, J. Tracz, G. Tomkowicz, M. Mikuśkiewicz:
PHYSICAL ANALYSIS OF TEMPERATURE DISTRIBUTION IN CERAMIC THERMAL BARRIER COATINGS OF RE2Zr2O7 TYPE DURING LASER HEAT TREATMENT PROCESS
Bastien Desbos, Jan Holub, Vítězslav Vacek, Jiří Kolísko:
DETERMINATION OF MATERIAL ACOUSTIC FEATURES USING SMALL SAMPLES
Robert Jachym, Krzysztof Kwieciński, Mirosław Łomozik, Michał:
PROPERTIES OF DISSIMILAR WELDED JOINTS MADE OF TEMPALOY AA-1 STEEL ASSIGNED FOR POWER INDUSTRY
Šárka Houdková, Olga Bláhová, Eva Smazalová:
MECHANICAL PROPERTIES OF HVOF SPRAYED, FLAME AND LASER REMELTED NiCrBSi COATING
Jiří Němeček, Ivan Jandejsek:
MECHANICAL PROPERTIES OF NANOTEXTILES DETERMINED WITH DIGITAL IMAGE CORRELATION
Petr Haušild, Aleš Materna, Jan Siegl, Miloš Kytka, Radim Kopřiva:
CHARACTERIZATION OF LOCAL STRESS-STRAIN BEHAVIOR IN WWER 440 WELD AND BASE METAL BY INSTRUMENTED INDENTATION TECHNIQUE
Petr Tej, Vítězslav Vacek, Jiří Kolísko, Jindřich Čech:
COMPUTER NONLINEAR ANALYSIS OF THE FORMATION AND DEVELOPMENT OF CRACKS IN A TRAVERTINE STONE PAVEMENT EXPOSED TO BENDING STRESS CAUSED BY A SINGLE LOAD
Petr Tej, Vítězslav Vacek, Jiří Kolísko, Jindřich Čech:
COMPUTER NONLINEAR ANALYSIS OF THE FORMATION AND DEVELOPMENT OF CRACKS IN A REINFORCED CONCRETE SLAB LOADED BY A PLANAR UNIFORM LOAD
Kamil Řehák, Petr Marcián, Jiří Valášek, Veronika Ebringerová, Zdeněk Florian:
MICRO-CT BASED IMAGING AND NUMERICAL ANALYSIS OF BONE HEALING
Bohumír Strnadel:
LOCAL CHARACTERISTICS OF DUCTILE FRACTURE SURFACE IN SPHEROIDIZED STEELS
Maroš Martinkovič, Peter Pokorný, Petra Bodišová:
INFLUENCE OF DRILL WEAR TO LOCAL PLASTIC DEFORMATION IN THE WALL OF DRILLING HOLE
Aleš Jíra, Jiří Němeček:
NANOINDENTATION OF HUMAN TOOTH DENTIN
Dariusz Grzesiak, Witold Biedunkiewicz, Anna Biedunkiewicz, Paweł Figiel:
ANALYTICAL PREDICTION OF THE MECHANICAL PROPERTIES OF METAL MATRIX NANOCOMPOSITE OBTAINED BY SELECTIVE LASER MELTING
M. Benachour, N. Benachour, M. Benguediab:
EFFECT OF STRESS RATIO ON FATIGUE FRACTOGRAPHY OF Al-ALLOY 2024 T351
Pavel Ctibor, Tomáš Kubatík, Zdenek Pala, Jiří Kotlan:
SPARK PLASMA SINTERING OF MULTILAYER CERAMICS - CASE STUDY OF Al2O3-Mg(Ca)TiO3 SANDWICH
Michal Truhlář, Vilma Buršíková, Jaroslav Sobota, Tomáš Kruml:
MECHANICAL PROPERTIES OF METALS MEASURED ON LOCAL SCALE
Vlastimil Králík, Jiří Němeček, Petr Koudelka:
IDENTIFICATION OF STRESS-STRAIN RELATION OF ALUMINIUM FOAM CELL WALL BY SPHERICAL NANOINDENTATION
Jiří Minster, Martin Šperl, Jaroslav Lukeš:
LOCAL VISCOELASTIC PROPERTIES OF A THERMOPLASTIC/CARBON LAMINATE AS INDICATOR OF FATIGUE DAMAGE
Vilma Buršíková, Jiří Buršík, Lukáš Zábranský, Petr Vašina, Pavel Souček:
STUDY OF THE NANOINDENTATION INDUCED DEFECTS IN NANOCOMPOSITE TiC/a-C:H THIN FILMS
Vilma Buršíková:
COMPARISON OF KVAZISTATIC AND DYNAMIC NANOINDENTATION RESULTS OBTAINED ON THIN FILMS DEPOSITED ON POLYCARBONATE SUBSTRATE
Jan Navrátil, Miroslav Maňas, Aleš Mizera, Martin Bednářík:
HARDNESS OF RECYCLED MODIFIED HDPE
Matěj Hruška, Olga Bláhová, Eva Smazalová, Šárka Houdková, Marek Vostřák:
MECHANICAL PROPERTIES OF LASER HARDENED MATERIAL
Martin Rezníček, Adam Škrobák, Martin Ovsík, Michal Stánek, David Maňas:
CORELATION OF RESULTS OF CREEP AND MICRO - INDENTAION CREEP FOR PP-COPO
Adam Škrobák, Michal Stánek, David Maňas, Martin Řezníček, Vojtěch Šenkeřík:
MECHANICAL PROPERTIES OF RUBBER SAMPLES
Martin Ovsík, David Maňas, Miroslav Maňas, Michal Stánek, Martin Bednařík, Petr Krátký:
MICRO-HARDNESS AND MORPHOLOGY OF LDPE INFLUENCED BY BETA RADIATION
Jiří Matějíček, Radek Mušálek, Pavel Chráska:
RESIDUAL STRESSES AND YOUNG'S MODULI OF PLASMA SPRAYED W+Cu COMPOSITES AND FGMS DETERMINED BY IN-SITU CURVATURE METHOD
Jiří Matějíček, Šárka Houdková Šimůnková:
THE INFLUENCE OF SPRAYING PARAMETERS ON STRESSES AND MECHANICAL PROPERTIES OF HVOF-SPRAYED Co-Cr-W-C COATINGS
Petr Koudelka, Tomáš Fíla, Tomáš Doktor, Daniel Kytýř, Jaroslav Valach, Josef Šepitka, Jaroslav Lukeš:
INSPECTION OF POST IMPACT FATIGUE DAMAGE IN CARBON FIBRE COMPOSITE USING MODULUS MAPPING TECHNIQUE
Martin Bednařík, David Maňas, Miroslav Maňas, Martin Ovsík, Jan Navrátil, Aleš Mizera:
SURFACE AND ADHESIVE PROPERTIES OF LOW - DENSITY POLYETHYLENE AFTER RADIATION CROSS - LINKING
Lenka Kocmanová, Petr Haušild, Aleš Materna, Jiří Matějíček:
NUMERICAL MODEL OF INSTRUMENTED INDENTATION BY A ROUNDED CONE INDENTOR USING FINITE ELEMENT METHOD
Jan Siegl, Petr Haušild, Adam Janča, Radim Kopřiva, Miloš Kytka:
STUDY OF MECHANICAL PROPERSTIES OF MATERIALS BY SMALL PUNCH TEST
Michal Lašan:
APPLICATION OF SMALL PUNCH TESTS FOR SCREENING OF MECHANICAL PROPERTIES FOR T91 STEEL
Agnieszka Kiszka, Tomasz Pfeifer:
EFFECT OF EN RATIO IN CURRENT WAVEFORM ON THE PROPERTIES AND MICROSTRUCTURE OF JOINTS OF VARIOUS GMA-WELDED STRUCTURAL MATERIALS
Hanuš Seiner, Petr Sedlák , Lucie Bodnárová , Michal Landa , Jitka Stráská, Miloš Janeček:
IN-SITU DETECTION OF SURFACE MICRO-CRACKING IN ULTRAFINE-GRAINED AZ31 MAGNESIUM ALLOY BY RESONANT ULTRASOUND SPECTROSCOPY
Michaela Kostelecká, Petr Huňka, Tomáš Bittner:
THE INFLUENCE OF FROST RESISTANCE ON UHPC PLATES WITH DIFFERENT TYPES OF TEXTILES ARMATURES
Jiří Buršík, Vilma Buršíková, Milan Svoboda:
MICROSTRUCTURE AND LOCAL MECHANICAL PROPERTIES OF DILUTED Cu-Co ALLOYS
Zdeněk Majer, Luboš Náhlík:
PARTICULATE COMPOSITE DAMAGE: NUMERICAL ESTIMATION OF MICRO-CRACK PATHS
Jan Vácha:
INFLUENCE OF CARBON NANOTUBES ON THE MECHANICAL PROPERTIES AND MORPHOLOGY OF THE THERMOPLASTIC POLYMER MATRIX OF THE POLYAMIDE 6
Alexandra Kovalčíková, Ján Dusza, Marek Bľanda:
INFLUENCE OF THE MICROSTRUCTURE ON MACRO VERSUS NANO-HARDNESS AND FRACTURE TOUGHNESS OF SiC CERAMICS
David Maňas, Martin Ovsíka, Miroslav Maňas, Michal Stánek, Štěpán Šanda, Martin Bednařík, Petr Krátký:
NANOHARDNESS OF ELECTRON BEAM IRRADIATED POLYAMIDE 6.6
Ľubomír Gajdoš, Martin Šperl, Jiří Frankl , Jaroslav Kaiser, Václav Mentl, Jan Kyncl, Jaroslav Lukeš, Radek Kužel:
VERIFICATION OF THE TREND OF MPL VARIATION IN FATIGUE BY MODERN METHODS
Ján Balko, Pavol Hvizdoš, Jose Manuel Córdoba, Ernesto Chicardi:
INSTRUMENTED INDENTATION OF COMPOSITE MATERIALS PREPARED BY METHODS OF MECHANOCHEMISTRY
Pavel Beneš, Daniel Vavřík:
TWO-DIMENSIONAL ISOTROPIC DAMAGE ELASTOPLASTIC MODEL FOR QUASI-BRITTLE MATERIAL
Moussa Charbel, Hernot Xavier, Bartier Olivier, Mauvoisin Gérard, Delattre Guillaume:
LOCAL EVALUATION OF THE HARDENING LAW OF A MATERIAL THROUGH SPHERICAL INDENTATION: DEFINITION OF AN AVERAGE REPRESENTATIVE STRAIN AND A CONFIDENCE DOMAIN
Idriss Mohamad, Bartier Olivier, Hernot Xavier, Mauvoisin Gérard, Gazo Hanna Eddie:
INFLUENCE OF THE WORK HARDENING RULE ON THE CYCLIC INDENTATION CURVES
Evgeniy Anisimov, Jan Maňák, Maxim Puchnin, Pavel Sachr:
THE EFFECT OF MICROSTRUCTURAL FEATURES ON MECHANICAL PROPERTIES
Jakub Horník, David Tondl, Pavel Sachr, Evgeniy Anisimov, Maxim Puchnin, Tomáš Chráska:
THE EFFECT OF PVD TUNGSTEN-BASED COATINGS ON IMPROVEMENT OF HARDNESS AND WEAR RESISTANCE
Philipp Eberwein, Jiří Nohava, Günther Schlunck, Michael Swain:
NANONINDENTATION DERIVED MECHANICAL PROPERTIES OF THE CORNEOSCLERAL RIM OF THE HUMAN EYE
Jiří Nohava, Michael Swain, Philipp Eberwein:
MICROMECHANICAL PROPERTIES OF POLYACRYLAMIDE HYDROGELS MEASURED BY SPHERICAL NANOINDENTATION
Bartier Olivier, Moussa Charbel, Mauvoisin Gérard, Hernot Xavier, Delattre Guillaume:
MECHANICAL CHARACTERIZATION OF CARBONITRIDED STEELS WITH SPHERICAL INDENTATION
Radek Mušálek, Catalina Taltavull, Antonio Julio Lopez, Nicholas Curry:
EVALUATION OF FAILURE MICROMECHANISMS OF ADVANCED THERMAL SPRAY COATINGS BY IN-SITU EXPERIMENT
Petr Zlámal, Tomáš Doktor, Petr Koudelka, Tomáš Fíla, Daniel Kytýř, Ondřej Jiroušek, Vlastimil Králík, Jiří Němeček:
INSPECTION OF LOCAL INFLUENCED ZONES IN MICRO-SCALE ALUMINIUM SPECIMENS
Petra Hviščová, František Lofaj, Michal Novák:
NANOHARDNESS OF CrN COATINGS VS. DEPOSITION PARAMETERS
František Lofaj, Petra Hviščová, Michal Novák:
NANOINDENTATION, NANOSCRATCHING AND NANOTRIBOLOGY OF CrN COATINGS
Adam Zeleňák, Miriam Kupková, Monika Hrubovčáková:
HARDNESS OF SINTERED BIODEGRADABLE MATERIALS BASED ON IRON POWDERS
Alica Mašlejová, Atila Drotár, Martin Černík:
DETERMINATION OF FAILURE MECHANISM OF CERAMIC ROLL
Michal Novák, František Lofaj, Petra Hviščová:
THE INFLUENCE OF INDENTATION CONDITIONS ON NANOHARDNESS DEPTH PROFILES OF W-C BASED COATINGS
Luboš Náhlík, Bohuslav Máša, Pavel Hutař:
INFLUENCE OF INTERFACES AND RESIDUAL STRESSES ON THE APPARENT FRACTURE TOUGHNESS OF LAYERED COMPOSITES BASED ON ALUMINA-ZIRCONIA
Vincent Keryvin, Jean-Pierre Guin, Ludovic Charleux, Jean-Christophe Sanglebœuf:
DEFORMATION MECHANISMS ININORGANIC GLASSESBY NANOMECHANICAL TESTING
Marek Bľanda, Tamás Csanádi, Annamária Duszová, Pavol Hvizdoš, Ján Dusza:
NANOINDENTATION STUDY ON TUNGSTEN CARBIDE CRYSTALS IN WC-Co HARDMETAL IN COMPARISON WITH AFM MEASUREMENTS
Radim Čtvrtlík, Jan Tomáštík:
WEAR OF HUMAN ENAMEL AND DENTIN
Delphine Aussavy, Rodolphe Bolot, François Peyraut, Ghislain Montavon, Serge Selezneff:
THERMOMECHANICAL PROPERTIES OF CoNiCrAlY-POLYESTER COMPOSITE COATINGS ELABORATED BY ATMOSPHERIC PLASMA SPRAY
Y. Duramou, R. Bolot, Jl. Seichepine, Y. Danlos, P. Bertrand, G. Montavon, S. Selezneff, J. Mériaux:
RELATIONSHIP BETWEEN MECHANICAL PROPERTY, HR15Y, AND MICROSTRUCTURAL PROPERTIES OF A PLASMA SPRAYED ALSI-POLYESTER COMPOSITE COATINGS: APPLICATION TO ABRADABLE MATERIALS
David Joguet, Yoann Danlos, Rodolphe Bolot, Ghislain Montavon, Christian Coddet:
MODELING AND MEASUREMENT OF THE EFFECTIVE YOUNG MODULUS OF POROUS BIOMEDICAL MATERIALS MANUFACTURED VIA SLM
Lukasz Sadowski:
NON-DESTRUCTIVE IDENTIFICATION OF DEFECTS IN POWER SUPPORT STRUCTURES FOUNDATIONS BY MEANS OF ACOUSTIC TECHNIQUES
Petr Král, Jiří Dvořák, Marie Kvapilová, Jaroslav Lukeš, Václav Sklenička:
CONSTANT LOAD TESTING OF MATERIALS USING NANOINDENTATION TECHNIQUE
Aleš Materna, Petr Haušild:
NUMERICAL STUDY OF THE EFFECT OF BERKOVICH INDENTER ORIENTATION ON THE ELASTIC RESPONSE OF ANISOTROPIC MATERIAL
Ivo Černý, Jiří Sís:
EVALUATION OF FATIGUE STRENGTH OF HEAT TREATED AND LASER HARDENED 42CrMo4 STEEL CONSIDERING LOCALIZED INITIATION MECHANISMS
Monika Kašiarová, Dagmar Galusková, Petra Gaalová, Zuzana Vilčeková, Dušan Galusek:
CORROSION BEHAVIOUR OF HUMAN TEETH MEASURED BY NANOINDENTATION METHOD
Zuzana Vilčeková, Monika Kašiarová, Magdaléna Domanická, Pavol Šajgalík:
DETERMINATION OF LOCAL MECHANICAL PROPERTIES OF Si3N4 BASED FOAMS
Monika Vilémová, Barbara Nevrlá, Jiří Matějíček, Radek Mušálek:
INFLUENCE OF THE PREHEATING TEMPERATURE ON THE QUALITY OF THE COATING/SUBSTRATE INTERFACE
Peter Burik, Ladislav Pešek, Lukáš Voleský:
THE EFFECT OF MATERIALS PILE UP ON YOUNG'S MODULUS TEST BY INSTRUMENTED INDENTATION TESTING
Emil Spišák, Ján Slota:
LOCAL STRAIN HARDENING AND NONUNIFORMITY OF PLASTIC STRAIN OF TINPLATE
Zdenek Pala, Radek Mušálek, Jiří Kyncl, Petr Harcuba, Josef Stráský, Kamil Kolařík, Nikolaj Ganev, Jiří Matějíček:
EFFECT OF BORIDING TIME ON MICROSTRUCTURE AND RESIDUAL STRESSES IN BORIDED HIGHLY ALLOYED X210CR12 STEEL
